AutoPosing Tool

AutoPosing Tool group of parameters. Because of the volume of this section, only some of the parameters are shown.

This section contains parameters for the AutoPosing tool.

Add Network Results to Actuals
(not currently used)

Debug Stop Level
(not currently used)

Debug Stop Step
(not currently used)

DeselectedColor_1, DeselectedColor_2 and DeselectedColor_3
These three parameters control the color of the non-selected AutoPosing Controllers.

Finger Pre Tip Deselected Color Index
The color for the additional index finger controller.

Finger Pre Tip Deselected Color Mid
The color for the additional middle finger controller.

Finger Pre Tip Deselected Color Pinky
The color for the additional pinky finger controller.

Finger Pre Tip Deselected Color Ring
The color for the additional ring finger controller.

Finger Pre Tip Deselected Color Thumb
The color for the additional thumb controller.

Finger Pre Tip Radius Index
The scaling factor for the index finger controller.
Set to 0.0055 by default.

Finger Pre Tip Radius Mid
The scaling factor for the middle finger controller.
Set to 0.0055 by default.

Finger Pre Tip Radius Pinky
The scaling factor for the pinky finger controller.
Set to 0.0055 by default.

Finger Pre Tip Radius Ring
The scaling factor for the ring finger controller.
Set to 0.0055 by default.

Finger Pre Tip Radius Thumb
The scaling factor for the thumb controller.
Set to 0.0055 by default.

Finger Tip Deselected Color Index
The color for the main index finger controller.

Finger Tip Deselected Color Mid
The color for the main middle finger controller.

Finger Tip Deselected Color Pinky
The color for the main pinky finger controller.

Finger Tip Deselected Color Ring
The color for the main ring finger controller.

Finger Tip Deselected Color Thumb
The color for the main thumb controller.

Finger Tip Radius Index
The scaling factor for the main index finger controller.
Set to 0.009 by default.

Finger Tip Radius Mid
The scaling factor for the main middle finger controller.
Set to 0.0065 by default.

Finger Tip Radius Pinky
The scaling factor for the main pinky finger controller.
Set to 0.008 by default.

Finger Tip Radius Ring
The scaling factor for the main ring finger controller.
Set to 0.0065 by default.

Finger Tip Radius Thumb
The scaling factor for the main thumb controller.
Set to 0.008 by default.

Fixed Frame Color
The color for the border marking fixed AutoPosing controllers.

Fixed Frame Size
The scaling factor for the border marking fixed AutoPosing controllers.
Set to 0.02 by default.

Flexible Toe
If this is enabled, the character's toes can bend to better interact with the ground level.
Disabled by default.

Floor Epsilon
Sets the minimum possible height for the AutoPosing Controllers at the character’s ankles (the point’s can’t be placed lower that defined by this value).
By default, it is set to 0.

Ghosts Activity
(not currently used)

Ghosts Show First Steps
(not currently used)

Ghosts Show Points States
(not currently used)

Ghosts Show Zero Step
(not currently used)

Ghosts Text Color
(not currently used)

Length of Direction Controller Chest
The length of the Direction Controller for the character’s chest.
Measured in Cascadeur units, set to 30 by default.

Length of Direction Controller Head
The length of the Direction Controller for the character’s head.
Measured in Cascadeur units, set to 20 by default.

Length of Direction Controller Pelvis
The length of the Direction Controller for the character’s pelvis.
Measured in Cascadeur units, set to 20 by default.

Line Width
The thickness of the edges that connect AutoPosing controllers.
Set to 2 by default.

Locked Color
The color for AutoPosing controllers when they are activated.

Physics Iterations
The number of iterations for physics simulations used by the AutoPosing tool.
Set to 100 by default.

Physics Iterations First
The number of physics iterations (relaxation) performed by moving non-locked secondary AutoPosing Controllers (represented by smaller green points).
Set to 200 by default.

Radius_1
The scaling factor for the ‘main’ (biggest) AutoPosing Controllers.
Such controllers are located at the character’s wrists, ankles, head etc.
Set to 0.009 by default.

Radius_2
The scaling factor for the ‘secondary’ (medium-sized) AutoPosing Controllers.
Such controllers are located at the character’s hands, feet etc.
Set to 0.0065 by default.

Radius_3
The scaling factor for the ‘lesser’ (smaller) AutoPosing Controllers.
Such controllers are located at the character’s knees, elbows, shoulders etc.
Set to 0.005 by default.

Selected Color
The color for the AutoPosing controllers when they are selected.

Snapping Angle
Sets how much does the character’s feet gravitate towards the ground level.
The value is the angle between the foot arch and the floor. 
The default value is 20.

Snapping Disabling Add Angle
Sets the threshold angle between the Additional point at the character’s knee and a vertical line.
If this angle is lesser than the value of the Snapping Disabling Add Angle value, and a the same time the angle between the knee edge and the same vertical line is greater than the  Snapping Disabling Angle value, the character’s foot won’t be snapped to the ground.
The default value is 30.

Snapping Disabling Angle
Sets the angle at which the character’s feet stop gravitating toward the ground level.
The default value is also 30.

Snapping Height
Sets the maximum height at which the character’s feet gravitate toward the floor.
Set to 30 by default.

Snapping Inverted Angle
Sets the angle between the character’s foot and a vertical line that switches the foot between the ‘regular’ and the ‘backside up’ positions.
Set to 70 by default.

Snapping Lateral Add Angle
Sets the angle between the Additional Point at the character’s knee and the ground that’s used to determine the exact way the character’s foot touches the ground: normally or with its side.
Set to 30 by default.

Spine Forward Backward Switching Angle
Sets the angle at which the character’s spine changes its bend (forward/backward).
Set to 160 by default.